Single / Dual Channel Inductive Loop Vehicle Detector IP30 For Universal Barrier Gate

▋Product precautions

1.  
2. The Universal Barrier Gate Single/Dual Channel Inductive Loop Vehicle Detector with Geomagnetic Induction Lift/Lower Bar is constructed with high-grade industrial materials, boasting superior anti-interference performance and environmental adaptability that greatly prolongs its service life.

   Select the shortest possible loop connecting wires at all times. Do not route them in the same conduit with power transmission wires. The parallel distance from power transmission wires must exceed 10 cm, and loop connecting wires between different detectors must also be kept separated. Connecting wires on both sides must be twisted more than 20 times per meter from the control box to the detector. Wires shall not extend beyond the trenches of adjacent loops and must be protected against mechanical damage.
    
3. If installing the detection loop on soft ground, ensure that vehicles driving over the surface and connecting wires will not cause loop displacement. Each coil and connecting wire must be mounted in a fixed position. Displacement of the detection loop or connecting wires will result in false triggering of the vehicle detector.