200W Traffic Control Arm Gates Waterproof High End Parking Gate Systems

▋Product Features

1. The golden astronaut series design is high-end and stylish, suitable for high-end parks and commercial scenarios; the fence boom features high strength, anti-collision and anti-climbing properties, stable operation and long service life.
2. The Warrior LCD screen license plate recognition machine is equipped with a high-definition lens, with a recognition accuracy of more than 99.8%, which can stably recognize in complex environments such as strong light, weak light, rainy days and nights, and cope with high-frequency traffic easily.
3. The recognition machine is deeply and intelligently linked with the barrier gate; the gate opens automatically after vehicle verification and closes automatically after the vehicle passes, requiring no on-duty personnel throughout the process, greatly improving the access efficiency.

▋Product precautions

1. When the product is running, please confirm that there are no obstacles blocking the running path;
2. When the barrier gate is in operation, it is strictly prohibited to open the chassis door or cover to avoid accidents;
3. The chassis shell must be grounded and a leakage protection switch must be installed at the power end;
4. When lowering the gate, it is strictly prohibited to place objects or have people standing or walking below the gate;
5. When there is a power outage at the barrier gate, the gate rod needs to be manually raised through the hand wheel at the end of the motor;
6. The barrier gate must be operated with a hand crank when the power is off;
7. When the product leaves the factory, the tension spring has been matched to a balanced state according to the length and weight of the brake rod. It is not allowed to increase or decrease the length and weight of the brake rod without authorization to avoid the danger of losing balance. If changes are required, professional personnel should be consulted for operation;
8. Without installing the tension spring on the machine, it is strictly prohibited to remove the tension spring when the brake lever is in a horizontal position;
9. When replacing or repairing the brake lever, it must be in the lifting position and in a power-off state. Remove the tension spring, and one person should hold the brake lever with their hand. The other person should use the hand wheel at the end of the hand cranked motor to lower the brake lever to a horizontal position before replacing it.