Silver Robot Series Curved Arm Bar Parking Lot Barrier Gate

▋Product Features

1. strength, beautiful appearance, precise size, and good heat dissipation.
2. Adopting bright silver vacuum spraying process, the body has a delicate texture and uniform luster, anti-oxidation, anti-fading and scratch-resistant, showing high-end technological sense, adapting to high-end commercial and high-quality community scenarios, and enhancing the overall grade of the parking lot.
3. Support for open position, close position, and status relay output
4. Supports RS232/RS485 serial communication
5. Support opening counting function and unmanned automatic closing function
6. Support high sensitivity anti smashing and rebound protection function

▋Product precautions

1. When there is a power outage at the barrier gate, the gate rod needs to be manually raised through the hand wheel at the end of the motor;
2. The barrier gate must be operated with a hand crank when the power is off;
3. When the product leaves the factory, the tension spring has been matched to a balanced state according to the length and weight of the brake rod. It is not allowed to increase or decrease the length and weight of the brake rod without authorization to avoid the danger of losing balance. If changes are required, professional personnel should be consulted for operation;
4. Equipped with robot-level high-precision induction and frequency conversion drive system, it realizes fast response, automatic identification and automatic lifting and lowering, and is equipped with four-fold intelligent protection to fully ensure the safety of vehicles, pedestrians and equipment.
5. When replacing or repairing the brake lever, it must be in the lifting position and in a power-off state. Remove the tension spring, and one person should hold the brake lever with their hand. The other person should use the hand wheel at the end of the hand cranked motor to lower the brake lever to a horizontal position before replacing it.