Automatic Swing Turnstile Barrier Gate , Access Control Swing Gate Turnstile

▋Product Features

1. With an exclusive stainless steel swing arm structure, it integrates pedestrian control protection and mechanical sturdiness, being impact-resistant and wear-resistant, which can resist external damage and adapt to complex usage environments.
2. Anti reversal function: During the process of resetting the swing arm, if external force reverses the swing arm, the swing arm will automatically initiate reverse thrust and issue an alarm. After the external force disappears, it will automatically return to the zero position to resume traffic.
3. Automatic protection function: When external force prevents the swing arm from moving normally and the external force is continuous, the system will automatically detect it for 20 seconds and then automatically protect and enter sleep mode. When the next valid signal is input, the gate will automatically return to normal.
4. Multi level collision buffering function: In case of illegal passage or collision, the brake rod buffers the corresponding angle and activates instant reverse thrust, while also triggering an alarm. This not only achieves humanized injury prevention, but also greatly reduces mechanical damage caused by frequent or continuous collisions.
5. Unmanned duty: The swing arm automatically opens when powered off, and automatically resets when powered on (blocking passage).

▋Product precautions

1. The gates must be placed correctly in order, and the left and right gates of each channel should be aligned;
2. If the equipment is used outdoors, a 100-200mm high cement platform should be established at the installation site for moisture insulation, and sun and rain protection facilities such as a ceiling should be installed,
3. Connect the system protection ground wire properly;